Matt PU heat seal material with polyester backing, created for inkjet digital printing & cutting systems with solvent and eco solvent inks. Despite being very thin, the material grants a high covering power on dark fabrics.
SOFT PRINT COLOR MATT
Description
Matt PU heat seal material with polyester backing, created for inkjet digital printing & cutting systems with solvent or eco solvent inks. Despite being very thin, the material grants a high covering power on dark fabrics.
Average film thickness before transfer: 45 micron
Usage informations
Due to the many different base materials available on the market, the following instructions are given as a guideline only :
Plotter settings (eg. with ROLAND VP-300)
Blade: new at 50°
Minimum cutting pressure: 60 gf Transfer setup
Temperature: 155 °C (310°F) Time: 15 seconds
Pressure: medium (3÷4 bar)
Procedure
Print and cut the material.
Weed the exceeding material.
Wait for drying for at least 4 hours.
Remove the print from the polyester backing using Siser’s T.T.D. Easy (adhesive, transparent and resistant to high temperatures)
Heat apply
Remove the application tape cold.
Certifications The product is REACH approved