The Modela PRO II MDX-540 is our largest and most powerful milling machine. You can use it to create profesisional prototypes and industrial designs. You can equip the ailing machine with an automatic tool changer, a rotary axis.
Use the MODELA PRO II MDX-540 to make functional prototypes and industrial models quickly and with high precision. You may use the material of your choice for this purpose. Commonly used materials are ABS, POM, and polyurethane. The MDX-540 can also be used for milling aluminium and copper. Apart from prototypes, you can also use the milling machines to make small series of components and moulds.
Production takes place using the SRP technology. SRP means Subtractive Rapid Prototyping. In this technique, prototypes are made by milling a certain shape from a block. In additive systems, prototypes are made by placing thin layers of materials one on top of the other. SRP has several advantages over additive systems: it is cheaper, supports more materials and can finish models excellently.
You can keep your ideas confidential since you don’t need to outsource the production of prototypes. You will also save a lot of money and time. Furthermore, the device is easy to operate and the quality of the prototypes is high.
Thanks to the precision spindle, the results are so precise that little or no finishing is required. The separate control panel allows you to operate the device from a safe distance. You can also set up and control the device via your PC with the virtual control panel.
The device stops immediately on pressing the emergency button. An (optional) cover protects the milling system, thereby ensuring safety as well as the cleanliness of the surrounding area.
| MODEL | MDX-540 |
| Cuttable material | Plastic resin and light metal |
| XYZ-axis travels | X x Y x Z: 500 x 400 x 155 mm |
| Distance from spindle nose to table | Maximum 254 mm |
| Table size | Width x depth: 550 x 420 mm |
| Loadable workpiece weight | At acceleration of 0.2 G: maximum 12 kg, 0.1 G: 20 kg, 0.05 G: 20 kg |
| XYZ-axis drive system | AC servo motor, 60 W |
| Operating speed | Maximum 7.5 m/min |
| Acceleration | 0.2 G, 0.1 G, 0.05 G |
| Software resolution | RML-1 mode: 0.01 mm, NC-code mode: 0.001 mm |
| Mechanical resolution | 0.001 mm (0.00004 in.) |
| Positioning accuracy | ±0.1 mm/300 mm, under no-load conditions |
| Repeat accuracy | ±0.05 mm, under no-load conditions |
| Origin reproducibility (when the power is switched on/off) | ±0.05 mm |
| Spindle motor | DC brushless motor, maximum 400 W |
| Spindle speed | 400 to 12,000 rpm; 400 to 3,000 rpm for positioning and centering |
| Tool chuck | Collet method, maximum diameter of the tool: 10 mm |
| Control command sets | RML-1 and NC codes |
| Interface | USB (compliant with Universal Serial Bus Specification Revision 1.1) |
| Power supply | Voltage and frequency: AC 100 to 120 V/220 to 240 V ±10%, 50/60 Hz Required power capacity: 7 A (100 to 120 V)/4 A (220 to 240 V) |
| Power consumption | Approx. 700 W |
| Acoustic noise level | During operation (no cutting): 65 dB (A) or less, during standby: 40 dB (A) or less (according to ISO 7779) |
| Dimensions | Width x depth x height: 745 x 955 x 858 mm |
| Weight | 102 kg |
| Operating temperature | 5 to 40°C |
| Operating humidity | 35 to 80% (no condensation) |
| Included items | Handy panel, power cord, tool sensor, sensor cable, nut, nut wrench, wrench, hexagonal wrenches, Roland Software Package CD-ROM, SRP Player CD-ROM, User's Manual, Roland Software Package Software Guide, SRP Player Installation and Setup Guide, NC Code |
