The EGX-350 can make beautiful engravings on various materials. Examples are plastic, aluminum, copper and wood. The EGX-350 is versatile and user friendly and engraves signs, nameplates, lighters, cups and gifts, among others.
The EGX-350 is a versatile, user-friendly and professional device. It engraves on a wide variety of materials such as plastic, aluminium, copper and wood. Unlike laser engravers, the EGX-350 preserves the original colours and texture of wood and copper. The unit also engraves texts, logos and designs very precisely and sharply. Use the EGX-350 to engrave signs, nameplates, lighters, cups and gifts.
Use the EGX-350 to make beautiful custom-made items for indoor as well as outdoor, such as banners and signs. The device transforms everyday cups, commemorative plaques and promotional materials into valuable mementos. You can personalise them with names, events or dates. You can even create templates for rhinestones that are applied on T-shirts, handbags and other accessories with a heat press. The working range is 305 mm by 230 mm.
The EGX-350 is very easy to install and use. A USB cable connects the device to your PC and an easy to operate, separate control panel allows you to move around when operating the machine. The EGX-350 also contains an electronic sensor that exactly measures the thickness of the material (Z-zero) to guarantee a constant engraving depth throughout the production process. The adjustable cover opens in two ways, which gives easy access to the engraved product. Moreover, the brushless motor can run for long periods without stopping, while the dust extraction can be easily attached to the spindle so as to guarantee clean operation.
You can use the EGX-350 along with the design software R-Wear Studio. This allows you to easily engrave templates for rhinestones. These templates and stones can be used to decorate or personalise T-shirts, jeans and gifts.
The device is supplied with user-friendly software. You can produce professional results in no time, even if you have no engraving experience.
|Table size||305 (W) x 230 (D) mm [12 (W) x 9.1 (D) in.]|
|XYZ-axis travels||305 (X) x 230 (Y) x 40 (Z) mm [12 (X) x 9.1 (Y) x 1.6 (Z) in.]|
|XYZ-axis drive system||Stepping motor, 3-axis simultaneous control|
X and Y axes: 0.1 to 60 mm/sec. (0.004 to 2.4 in./sec),
Z axis: 0.1 to 30 mm/sec. (0.004 to 1.2 in./sec)
|Software resolution||0.01 mm/step or 0.025 mm/step (0.0004 in./step or 0.001 in./step)|
X and Y axes: 0.0025 mm/step (0.0001 in./step),
Z axis: 0.00125 mm/step (0.0005 in./step)
|Spindle motor||Brushless DC motor, maximum 50 W|
|Spindle speed||5,000 to 20,000 rpm|
|Tool chuck||Cutter holder, collet method|
|Loadable workpiece thickness||Maximum 40 mm (1.6 in.) or 38 mm (1.5 in.) when nose unit is used|
|Connectivity||USB (compliant with Universal Serial Bus Specification Revision 1.1) or serial (RS-232C-compliant)|
|Control command set||RML-1|
|Power requirements||AC 100 to 120 V ±10%, 1.3 A, 50/60 Hz (overvoltage category II, IEC 60664-1); or AC 220 to 240 V ±10%, 0.6 A, 50/60 Hz (overvoltage category II, IEC 60664-1)|
|Power consumption||122 W|
|Acoustic noise level||During operation: 60 dB (A) or less (when not cutting), During standby: 40 dB(A) or less (as specified by ISO 7779)|
|Dimensions||616 (W) x 591 (D) x 393 (H) [24.3(W) x 23.3(D) x 15.5(H)]|
|Weight||34 kg (75 lb.)|
Temperature: 5 to 40°C (41 to 104°F),
Humidity: 35 to 80 % (no condensation)
Ambient pollution degree: 3 (as specified by IEC 60664-1)
|Accessories||Power cord, depth regulator nose (nose unit), nose-unit retainer (retaining screw, spring), spare mounting screw (for the cutter holder), character cutter (diameter 3.175 mm), flat cutter (diameter 3.175 mm), wrench, solid collet (diameter 3.175 mm), solid collet (diameter 4.36 mm), hexagonal wrench, hexagonal screwdriver, handy panel, adhesive sheet, vacuum adapter for chip cleaning, Roland Software CD-ROM, Roland EngraveStudio™ CD-ROM, Roland Software Program Guide, Roland EngraveStudio™ Program Guide, and User's Manual|