CWT is the new generation of working table and is mainly used for laminating foil and cutting materials, etc.
Manual laminating work is commonly and skillfully performed around the world. However, a mistake in handling the sheets or a moment of lost focus when applying the merging pressure could cause the job to be wasted and unwanted costs to be incurred. The time to produce on a manual basis is excessive in comparison with the semi-automated laminating process offered by the new CWT worktable. Estimated reduction of the production time is 80-85%!
A potential cost saving is maintaining the operators’ health and physical status. It is not unusual that intense manual effort over time causes fatigue type injuries. Except for the cost issue a temporary leave of a skilled employee could be crucial to the company.
The modular design makes the CWT worktable easy to transport and install. The units are delivered in compact packages, 80% less in volume compared to other suppliers’. The low transportation cost taken aside, the slim package can easily be brought inside customer’s facilities through normal sized doors. What’s more, the CWT worktable accepts varying floor conditions. Leveling screws allow for 3 in. adjustment range.
Apply prints and other self-adhesive materials on any substrate, e.g. acrylic or aluminium sheets, ACM panels, backlit and frontlit soft fabrics, glass, etc. Applying protective laminate with total control! Applying large media is no problem thanks to the full length side pockets. Flexible for any substrate thickness up to 2.75 in.
You don’t need any special staff! Most people are producing exquisite laminates within an hour!
Galimi matmenys | 3000 mm | 3300 mm | 4000 mm | 4700 mm |
1450 mm | - | CWT 330JR | - | - |
1600 mm | CWT1630 | - | CWT 1640 | CWT 1647 |
1480 mm | - | - | CWT 1840 | CWT 1847 |
Techninės specifrikacijos | CWT 330JR | CWT 1630 | CWT 1640 | CWT 1647 | CWT 1840 | CWT 1847 |
Stalo plotis | 1450 mm | 1600 mm | 1600 mm | 1600 mm | 1800 mm | 1800 mm |
Stalo ilgis | 3300 mm | 3000 mm | 4000 mm | 4700 mm | 4000 mm | 4700 mm |
Darbinis plotis | 1400 mm | 1530 mm | 1530 mm | 1530 mm | 1730 mm | 1730 mm |
Darbinis ilgis | 2940 mm | 3560 mm | 3560 mm | 4260 mm | 3560 mm | 4260 mm |
Medžiagos storis | iki 65 mm | iki 70 mm | ||||
Stalo aukštis | 900 mm | 950 mm | ||||
Stalo paviršius | Kompozitinė plokštė + pjovimo pagrindas | Stiklas + pjovimo pagrindas | ||||
Šoninės kišenės | Nėra | Yra | ||||
Volo stūmimo rankena | Yra | Yra | ||||
Medžiagos rulono laikilis | Papildoma | Yra | ||||
Papildomas rulono laikiklis | Papildoma | Yra | ||||
LED pašvietimas | Nėra | Papildoma | ||||
Aukščio reguliatorius | iki 70 mm | iki 80 mm | ||||
Suslėgto oro poreikis | 6 - 8 bar | 6 - 8 bar | ||||
Matmenys | 1660 x 3350 x 1220 mm | 1810 x 3050 x 1260 mm | 1810 x 4050 x 1260 mm | 1810 x 4750 x 1260 mm | 2010 x 4050 x 1260 mm | 2010 x 4750 x 1260 mm |
Matmenys (dėžėje) | 1670 x 3400 x 750 mm | 1850 x 3150 x 750 mm | 1850 x 4150 x 750 mm | 1850 x 4850 x750 mm | 2100 x 4150 x750 mm | 2100 x 4850 x750 mm |
Masė | 350 kg | 460 kg | 600 kg | 690 kg | 670 kg | 790 kg |
Masė (dėžėje) | 420 kg | 530 kg | 670 kg | 790 kg | 770 kg | 890 kg |
Garantija | 2 metai | 3 metai |